• You will need to login or register before you can post a message. If you already have an Agriville account login by clicking the login icon on the top right corner of the page. If you are a new user you will need to Register.

Announcement

Collapse
No announcement yet.

Friday thank you notes

Collapse
X
Collapse
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    The Diesel engine runs a friction plate .
    Google them for more info .
    All I know is that they work very well . Absolutely dry heat .
    Just increase engine rpm to increase oil pressure and thus the heat generated.
    We are running them around 160 to 180 deg F . Just pull a tandem load out after two days and let er go anouther day or two . Drying about 1 to 1.5 points per day.

    They are used all over the oil patch in Alberta .
    We fill the fuel tank about every 3-4 days.

    Comment


      #22
      Originally posted by Crazyharrows View Post
      Hey furrow,what is the specs on that one,did you rent it.
      600,000 btu . Yes we rented two of them . Set up on four 5000 bus bins .
      There are larger ones at 1.2 mil btu

      Comment


        #23
        Originally posted by saskshafe View Post
        So the heat doesn’t magically appear. Do you have any idea what it is costing to dry your grain. Looks like a neat safe system.
        Our propane is costing around $0.09/bus. Removing 4.5-5 %. No idea on the power bill.
        "Friction disk" technology is all they'll admit to. Yeah that whole bottom black part is a diesel tank. In this country thermodynamic rules still apply apparently. Sure hope they at least duct the radiator heat into the outlet too. Lose a hell of a lot of btu's up the exhaust making it 'clean' heat. It cost me about $0.30/bu propane only to dry several thousand bushels of feed wheat from 23% to 13.5% at -3c air temp with a Farm Fans dryer. **** that. Wheat can stay in the field and I'll dry the canola.

        Comment


          #24
          Originally posted by Tucker View Post
          "Friction disk" technology is all they'll admit to. Yeah that whole bottom black part is a diesel tank. In this country thermodynamic rules still apply apparently. Sure hope they at least duct the radiator heat into the outlet too. Lose a hell of a lot of btu's up the exhaust making it 'clean' heat. It cost me about $0.30/bu propane only to dry several thousand bushels of feed wheat from 23% to 13.5% at -3c air temp with a Farm Fans dryer. **** that. Wheat can stay in the field and I'll dry the canola.
          We did some canola from 16.5 to 12 ish in 4 days then hauled er out to elevator
          Got some wheat from 19.5 down to dry in about 4 days .
          Did not do a lot at those moisture levels but just wanted to see what they were capable of.
          Doing wheat now in at 16.5 to 17 . Will haul out Monday .
          We just rented to give us some leeway in combine time until Grain was drier in field ... but looks like we will be using a bit more lol

          Comment


            #25
            Neat system furrow.

            Comment


              #26
              Originally posted by furrowtickler View Post
              The Diesel engine runs a friction plate .
              Google them for more info .
              All I know is that they work very well . Absolutely dry heat .
              Just increase engine rpm to increase oil pressure and thus the heat generated.
              We are running them around 160 to 180 deg F . Just pull a tandem load out after two days and let er go anouther day or two . Drying about 1 to 1.5 points per day.

              They are used all over the oil patch in Alberta .
              We fill the fuel tank about every 3-4 days.
              You must have grain at 3% moisture grain with 160-180 F temps. Never hear of that much heat in an aeration bin.

              Any problems with condensation or damaging the over dry grain while moving it?

              Comment


                #27
                Originally posted by furrowtickler View Post
                600,000 btu . Yes we rented two of them . Set up on four 5000 bus bins .
                There are larger ones at 1.2 mil btu
                Furrow; do you mind me asking what the approx cost was to rent a 600K btu unit? I'm looking a Artic Therm or Conelly Max. The 700k btu Conelly is $2850/week and burns about 100gal fuel every 13hrs. How is the AT on fuel? Did you run them 24/7? How big are your air fans on bin? Any spoilage? how full did you fill the 5000's? I'm dealing with 26,000 cold barley that quite damp and want to get it down about 4 points to go to feedlot. Thanks.

                Comment


                  #28
                  Originally posted by OvernOut View Post
                  Furrow; do you mind me asking what the approx cost was to rent a 600K btu unit? I'm looking a Artic Therm or Conelly Max. The 700k btu Conelly is $2850/week and burns about 100gal fuel every 13hrs. How is the AT on fuel? Did you run them 24/7? How big are your air fans on bin? Any spoilage? how full did you fill the 5000's? I'm dealing with 26,000 cold barley that quite damp and want to get it down about 4 points to go to feedlot. Thanks.
                  Was $3600/month per unit
                  Still playing with amounts in bins
                  Looks like best best results are about 3500 bus in 5000 bus bin . Take 500 bus out after about 2 days to get damp cone off top and get the around rocket .
                  Fuel totally depends on how hard you run it . Still playing with that as well but 200 gals will last at least 50 hrs at around 2100 rpm at 40 psi oil pressure and 160 deg heat. They claim around 4 gal / hr .. it’s close .
                  Yes run 24/7.
                  5 hp fans
                  Some hang up on walls and cone of bin , but minimal when empty . No real spoilage
                  Trick is to move a tandem load out after 24 hrs or so . Moves out real dry stuff and gets your toughest grain around rocket.
                  Ideally a fan on top of bin to draw out excess moisture and condensation would be helpful. Some bins have those exhaust fans . We do not but are looking at that possible option
                  Again we got these set up just to temporarily dry some grain until conditions improved . Learning as we go here as well . But at the end of the day , they work and I don’t have to worry about propane burners , deliveries and it’s dry heat.

                  Comment


                    #29
                    Originally posted by poorboy View Post
                    You must have grain at 3% moisture grain with 160-180 F temps. Never hear of that much heat in an aeration bin.

                    Any problems with condensation or damaging the over dry grain while moving it?
                    Yes there is some condensation. A fan on top would be ideal to pull moisture right out of bin .
                    Yes some grain gets overdried if temp too high or you don’t move out some after a day or two.
                    We had zero issues at all at elevator with canola or wheat after drying it down.
                    Yes you could over dry and have issues if you put 20 moisture wheat in , hammer the heat and don’t rotate at all.
                    You can run these heaters up to well over 200 deg . If you did that of course there would be overdrying issues lol.

                    Comment


                      #30
                      Originally posted by Oliver88 View Post
                      What does it run on?
                      Just a Kabota Diesel engine .

                      Comment

                      • Reply to this Thread
                      • Return to Topic List
                      Working...