i put up a 52 by 52 by 18 with 30 foot bi fold door in 2018 , have old 26 by 40 shop atached on the side , it pole built , they said very hard to get studs 18 foot long and straight ! ended up around 100 thousand with heating and wireing all done , even if the cost is high now so what , if you can use the workshop build it anything is better than money sitting in the bank now with the way things are going
Announcement
Collapse
No announcement yet.
Concrete In Pole Shed
Collapse
Logging in...
Welcome to Agriville! You need to login to post messages in the Agriville chat forums. Please login below.
X
-
60x72x20 pole shed insulated and lined interior, overhangs, windows, 2 overhead doors, pour floor after with two sumps, $220k
For Integrity, add $50k.
60x72x20 stick build w. 2x8 on 4’ walls with floor, same finishing, $315k
Quotes with the last 30 days.
Electrical extra.
Comment
-
Guest
Originally posted by Taiga View Post60x72x20 pole shed insulated and lined interior, overhangs, windows, 2 overhead doors, pour floor after with two sumps, $220k
For Integrity, add $50k.
60x72x20 stick build w. 2x8 on 4’ walls with floor, same finishing, $315k
Quotes with the last 30 days.
Electrical extra.
48x60x18
Goodon built , finished inside , insulated 16 foot overhead door and 26x18 bifold $68 k total
Stud wall same size was $125k This is an excellent building
Poured cement around posts
No gaps inside
Comment
-
Originally posted by Taiga View Post60x72x20 pole shed insulated and lined interior, overhangs, windows, 2 overhead doors, pour floor after with two sumps, $220k
For Integrity, add $50k.
60x72x20 stick build w. 2x8 on 4’ walls with floor, same finishing, $315k
Quotes with the last 30 days.
Electrical extra.
Edit: I checked again and noticed the quoted stick build is on thickened edge slab.
I had thought is was pony wall as that was what we had discussed. So add $50k.
Not sure $100k difference between a pole building with poured floor and stick built on slab is worth the extra money, they will look identical when done and buttoned up.
Comment
-
With energy costs increasing every year, you will want to insulate under that concrete floor and around the perimeter. I spray foamed the bottom wall cavity in from the outside to even with the inside of the poles. Put 4" of styrofoam under the outside 4' and then 2" on rest of the inside.
Other things to think about are concrete apron in front?
Tyvek on the outside of the building under the tin is cheap, but inconvenient for the construction crew, so they don't mention it, but it is something you want.
I wish that I had put a small roof over my walk in doors.
Make sure that you are getting the deepest posts you can. An 8" deep post can get 9-9.5" of insulation in when it swells out into the horizontal strapping for the tin. Better to have 8" posts spaced wider than to have 6" deep posts put closer together.
I had the end posts run all the way up and attached to the top of the truss. Some companies do this, but most will not unless you ask for it. Way stronger.
I wish that an exhaust fan had been installed on initial shop construction.
Comment
-
-
Guest
Originally posted by SASKFARMER View PostGo bigger!
Our main shop is pole with 6 in concrete for cats and hoe.
Addition is 2 x 6 and it’s a slab with piles by old building
Other shed is stuck with 3 ft concrete piles and sides and stuck on top 80 x 140
Hoe will be less
Comment
-
Originally posted by caseih View Post16 foot ceiling is a big mistake
Good for nothing
Your overhead door will be 14
Don’t do it
Neighbor put 16ft walls and 14ft doors and can't get his combine in. It's a tr87.
Comment
- Reply to this Thread
- Return to Topic List
Comment