Friday Crop Report on a Thursday!

[biglentil]

9.9 , 10 % more and less loss due to more even sieve load
10.9 .15-20% more
Just going by what we seen between the two

NH slightly less fuel / hr

Almost everyone with a case has the shoe swing set in Corn and Bean, put it in the same Small Grain position as a NH and the difference disapears. 15 minute job.

[furrowtickler]

I really liked the 9240 , but these 9.9’s are another step for sure

The revelations are much more consistent than the elevation series.
Elevation’s made in Grand Island
Revelation’s Belgian
Significant difference

[blackpowder]

9.9 or 10.9 ?

10 i believe

[blackpowder]

Threshing and saving mean more to me than capacity at the 600 hp+ level i think.
Not crazy about more belts and crap and no reverser. Likely better in wheat. Better chopper for sure.
Looking forward to automation on next one.
Learning fun.

[blackpowder]

Almost everyone with a case has the shoe swing set in Corn and Bean, put it in the same Small Grain position as a NH and the difference disapears. 15 minute job.

Shoe swing?

[furrowtickler]

Threshing and saving mean more to me than capacity at the 600 hp+ level i think.
Not crazy about more belts and crap and no reverser. Likely better in wheat.
Learning fun.

They all reverse rotors now on the NH
Just a few more belts
Let us know when you do er , will be interesting 👍

[biglentil]

Shoe swing?

That little block when below is in Corn and bean all Cases come from factory in the CB position, look at a NH it will be in SG. Just make sure the bolt location is moved on the top of that arm as well and turn shoe over by hand without a belt on to ensure no interference. Mine have been in SG for 3 years now.

[furrowtickler]

We did the same on our 9240 , helped a lot

Gives the shoe slightly more throw

[furrowtickler]

Twin rotors and elevation sieve definitely an advantage. From personal experience concave set up on the Case definitely makes a difference. I think the New Holland will be quicker but takes longer to service in the morning.

Consistently better sample than the case we had even with Madds in the case . Not huge but noticeable

[Taiga]

Are the CR Elevation and Revelation still options for the current model year or are they named something different? I though the Elevation (Opti Sieve) was the small grains design? I am looking at going 8.90.

[furrowtickler]

Murray at MADD concaves probably the best in western Canada on NH or case advice and concave set ups and capacity/ losses experience

[poorboy]

Consistently better sample than the case we had even with Madds in the case . Not huge but noticeable

Furrow last year you were running the case 9240 and a Claas 750, what are you running this year?

[furrowtickler]

Furrow last year you were running the case 9240 and a Claas 750, what are you running this year?

Two NH 9.9’s

[Partners]

Daughter picking up the last swaths of canola..
We are done harvest 22.

[Guest]

That little block when below is in Corn and bean all Cases come from factory in the CB position, look at a NH it will be in SG. Just make sure the bolt location is moved on the top of that arm as well and turn shoe over by hand without a belt on to ensure no interference. Mine have been in SG for 3 years now.
[ATTACH]11074[/ATTACH]

So ours is wrong BL ?