Announcement
Collapse
No announcement yet.
For all you EV Promoters
Collapse
Logging in...
Welcome to Agriville! You need to login to post messages in the Agriville chat forums. Please login below.
X
-
-
Originally posted by chuckChuck View PostIt turns out that to electrify personal transportation doesn't require as much new electricity as the naysayers claim because EVs are so much more efficient than very inefficient ICE vehicles.
[ATTACH]12209[/ATTACH]
Comment
-
EV=CO2 Reduction???? Not.
Perhaps in some warm windy climates… which can generate reliable solar /wind energy…. Some day in the future…
For 80 % of the global land mass… hydro and nuclear will be required for reliable electrical grid supply….
Interesting times!
The UN just released a grim reaper climate report… add fuel to the fire… not constructive or practical.
Blessings and Prayers
Cold weather for the next month in North America… way below normal…
Climate change… blame it on global warming!
Cheers
Comment
-
To read the image above read the whole article from Yale on line.
https://yaleclimateconnections.org/2022/08/electrifying-transportation-reduces-emissions-and-saves-massive-amounts-of-energy/
Electrifying transportation reduces emissions AND saves massive amounts of energy
Electric vehicles are far more energy-efficient than traditional internal combustion vehicles.
Karin Kirk
by Karin Kirk August 7, 2022
EV concept
With high energy prices and increasing urgency to reduce fossil fuel burning, it makes sense to get the most out of every gallon of gasoline or kilowatt-hour of electricity.
A previous post showed that charging an EV costs around the equivalent of $1.41 per gallon in the U.S., offering consumers a major savings over gasoline. Part of why EVs are cheap to operate is that they use energy with impressive efficiency.
Delving deeper, there’s a stark difference between the way internal combustion and electric engines use energy. The bad news is that combustion engines are fundamentally inefficient. But the good news is that electric motors offer vast improvements and save money and energy. Even better: Replacing traditional vehicles with electric ones will require far less energy overall.
Modern gasoline-powered vehicles waste a whopping 80% of the energy in their fuel. For each gallon pumped into the tank, only a bit more than three cups go to moving the vehicle forward. In economic terms, for a $5.00 gallon of gasoline, only $1.00 of it gets you closer to your destination.
Most of this waste is an inescapable consequence of thermodynamics. Internal combustion engines ignite liquid fuel to create a pressurized gas that pushes pistons to turn a crankshaft that ultimately spins the car’s wheels. This multistep process bleeds off energy all along the way. Most of the energy in the fuel ends up as heat, and only a small fraction reaches the wheels. The concept of wasted heat becomes intuitive when one thinks about the hot air wafting off a car’s running engine. The engine itself gets hot; a cooling system is needed to manage excess heat; and heat is dispersed through the radiator and blows out the exhaust. All of that heat comes from gasoline, and none of it helps propel the vehicle.
Further energy uses come from pumps and fans, some of which, ironically, are needed to carry away waste heat. These are called parasitic losses. Mechanical friction within the transmission and drivetrain lops another 3 to 5% off the overall efficiency. The final loss of energy is from auxiliary electrical components like heated seats, lights, the audio system, and windshield wipers. Taken together, these accessories can consume up to 2% of the vehicle’s total energy intake.
The net result is that only around 20% of the energy that’s pumped into the fuel tank ends up at the wheels.
Gas-powered vehicle energy losses
Even the most fuel-efficient gasoline-powered vehicles can’t sidestep these energy losses. Cars with high fuel economy are lighter, smaller, and more aerodynamic, thereby making the best possible use of the energy that ends up in the drivetrain. Diesel engines have somewhat better thermodynamic efficiency, averaging in the high 30s to around 40%. But major thermodynamic losses are a stubborn fact of life for all combustion-based engines.
For a more detailed explanation and sources for the figure above, see FuelEconomy.gov.
The simple efficiency of electric motors
Electric vehicles are propelled by entirely different mechanisms. Energy enters the vehicle as electricity, which directly powers the drivetrain: EVs need not convert one form of energy to another, which is a big factor in their efficiency
Electric motors are simple machines with few moving parts, especially compared with the complexities of an internal combustion engine. In an EV, electricity from the car’s battery flows into a cylinder that generates a rotating magnetic field. Inside that cylinder is a rotor that spins as it gets pulled along by the magnetic attraction. The spinning rotor turns an axle that drives the wheels.
The whole process works in reverse, too: The car’s spinning wheels can turn the rotor and feed electricity back into the battery. This process of regenerative braking can recapture energy that would otherwise be lost as friction and heat.
EVs are not 100% efficient though, and they lose energy in a few ways. Some energy is lost in the process of recharging the battery, and electricity is consumed for the vehicle’s cooling and power steering. Auxiliary electric use is higher in EVs compared with combustion engines, mostly due to the electricity needed to heat the car’s interior in cold weather. In an internal combustion vehicle, waste heat is used to warm the car’s cabin.
In all, the various energy losses in an EV add up to 31% to 35%. Regenerative braking adds 22% back into the system, making the overall efficiency around 87% to 91%. The specific numbers vary based on the type of car and how it’s used, but the overall simplicity and efficiency is a contrast to traditional vehicles that have been the mainstay of the roadways for 130 years.
The numbers are from FuelEconomy.gov, and DigitalTrends has a helpful explainer for how various components of EVs work.
Energy lost by electric vehicles
Transition to EVs will reduce overall amount of energy needed for transportation
The energy efficiency of EVs is a clear boon for consumers, but it offers an even more significant benefit in the transition away from petroleum-burning transportation. In the U.S., about 8.9 million barrels of motor gasoline are used every day, and around 80% of that energy is wasted as heat and friction. Of the total amount of gasoline burned, only 1.8 million of those barrels (20%) propel vehicles along the road. This means that if the gasoline vehicle fleet was replaced with EVs, those EVs would need the energy equivalent of only around 1.8 million barrels of gasoline per day, plus the 11% energy loss within the EV itself. The rough math pencils out to the energy equivalent of around 2 million barrels of gasoline per day, which is a substantial savings over the 8.9 million barrels currently used.
Of course, this begs the question of the efficiency of electric power plants that charge EVs. Thermal power plants – such as coal, gas, or nuclear – face similar thermodynamic challenges as internal combustion engines, but power plants are more efficient than cars. Coal and nuclear are around 33% efficient, and combined cycle natural gas power plants are about 44% efficient. At the top end of the scale, hydropower is approximately 90% efficient. Even if the grid were entirely fueled by coal, 31% less energy would be needed to charge EVs than to fuel gasoline cars. If EVs were charged by natural gas, the total energy demand for highway transportation would fall by nearly half. Add in hydropower or other renewables, and the result gets even better, saving up to three-fourths of the energy currently used by gasoline-powered vehicles.
Replacing gasoline with different energy sources
But what about batteries? Manufacturing an EV battery consumes the energy equivalent of about 74 gallons of gasoline. Over the 10-year lifespan (or more) of the battery, the energy investment in the battery is far too small to change the outcome – which is good news.
Decarbonizing the world’s energy supply is an enormous and daunting task. But at least in this case, the job gets easier as highway transportation shifts away from oil. The major improvement in driving efficiency offered by EVs means that vehicles can emit less carbon and less pollution, while also lowering overall energy demand. In a world of tough tradeoffs, this one is an easy win.
Editor’s note: An upcoming article at this site will explore the efficiency of different types of power generation, including wind and solar.
Comment
-
Originally posted by TOM4CWB View PostEV=CO2 Reduction???? Not.
Perhaps in some warm windy climates… which can generate reliable solar /wind energy…. Some day in the future…
For 80 % of the global land mass… hydro and nuclear will be required for reliable electrical grid supply….
Interesting times!
The UN just released a grim reaper climate report… add fuel to the fire… not constructive or practical.
Blessings and Prayers
Cold weather for the next month in North America… way below normal…
Climate change… blame it on global warming!
Cheers
We saw a preview with Germany and Japan visits.
How will PMJT react? Will he keep parroting his single focus agenda? Will he sulk off to the fringes? Or come home with a new attitude and help our allies with new development of our natural resources?
Climate Change/woke/inclusiveness agenda is not playing well these days.
People value their house, car, and food more than they realized.
Comment
-
Originally posted by shtferbrains View PostBloomberg says talk at the upcoming G7 many countries will be focused on energy security. Climate Change / Green Economy has been bumped way down the list for obvious reasons.
We saw a preview with Germany and Japan visits.
How will PMJT react? Will he keep parroting his single focus agenda? Will he sulk off to the fringes? Or come home with a new attitude and help our allies with new development of our natural resources?
Climate Change/woke/inclusiveness agenda is not playing well these days.
People value their house, car, and food more than they realized.
Even if they had an inkling of a clue of what is actually happening on Canadian grain farms…. The target reduction would reduce global greenhouse gasses by.007% …. Way less than a rounding error…
The same goes for fossil fuel greenhouse gas production from Canadian emissions… at 3% of global emissions… this whole liberal greenhouse emissions plan is pointless and a wasteful economic exercise in fearmongering politics.
Spending a Trillion dollars to make the Canadian economy very in efficient…. Should make anyone with an ounce of Common Sense… take a very deep breath… and firmly state the WEF/UN national and global greenwash rhetoric… must be categorically rejected. They know they (WEF/UN) are misrepresenting future effects and human intervention models of Climate Change theories that are dubious at best.
Conserving energy is smart. Efficient use of resources is smart. Decarbonization provides neither solution… the present CO2 greenhouse gas projected programs do …neither.
If committing suicide is a solution…. Then the WEF/UN have a plan!
Cheers
Comment
-
Almost every country in the world has committed to reducing greenhouse missions.
Every province in Canada supports climate science and is committed to reducing emissions as well.
Reducing emissions through the 4Rs also will reduce the amount of nutrients ending up in rivers, lakes and the ocean.
If farmers are stewards of the land and environment then you think they should be supportive of improving fertilizer management?
Farmers are receiving benefits from the Renewalable Fuel Standard and Regulations in Canada that help to reduce greenhouse emmissions.
So should we stop subsidizing farmers with these programs because some don't believe greenhouse gases cause climate change?
Comment
-
CC….
You nor the federal government has any accurate information on how or what methods we are using to apply fertilizer on our farm.
Maximum of 70lb/ac N, direct application in the seed row , high efficiency absorbing P2O5 in year of application 2x plus available vs 11-51-0… high absorption S, K, Cu…. Direct banded next to the seeds….
27 water monitor locations in Alberta found NO leaching in to water bodies in fields in annual crops….
The Feds in Canada are totally speculating in western Canadian crops… not including pulses in calculating nitrous oxide emissions….in rotation being presently grown… using inaccurate Synthetic nitrogen requirements for production of our annual field crops in western Canadian agriculture….
Eastern Canadian Corn/Soy rotations with very different moisture conditions, frost free soil conditions, tillage used, tile drainage used … the transfer of eastern Canadian cropping production on to the vast majority of western Canadian acres… has very much misrepresented many of the production methods…. We use 100% section Controlers, use variable rate where appropriate… low application rate high efficiency fertilizers…
Your assessment of our fertilizer nitrous oxide emissions is with out accurate knowledge of what is going on. Adoption of high efficiency direct seeding… fertilizers and application methods, low opportunity for denitrifying problems…
Lead your vendetta to continue false assessment and assumptions of green house gas emissions from our farms in western Canadian Agricultural production.
You do a huge disservice to all Canadians… in speculative assessment and assumptions of actual farm level performance and efficiencies.
Praying that you think before you accuse us CC… with inappropriate inaccuracies.
Blessings and Cheers
Comment
-
Researchers would disagree with you Tom.
Don Flaten at the U of M has shown that P is moving into rivers and Lakes in Manitoba from crop residues and soils.
Are you soil testing all your fields frequently or at least some fields?
https://fertilizercanada.ca/wp-content/uploads/2019/07/4R-P-fertilizer-mgmt-for-NGP-summary-July-3-2019_VF.pdf
4R Management of Phosphorus Fertilizer in the Northern Great Plains:
A Review of the Scientific Literature
Summary
July 3, 2019
Cynthia Grant and Don Flaten
University of Manitoba
4.0 Environmental and Sustainability Concerns Related to Phosphorus
Fertilizer
Key Messages
ï‚· Small amounts of P moving into surface water can have a large effect on water quality, so
losses of P that are not agronomically significant can be environmentally damaging,
particularly with respect to algae growth in freshwater (eutrophication).
ï‚· Most of the P loss on the Northern Great Plains is driven by movement of dissolved P during
the snowmelt period.
ï‚· Phosphorus runoff is a function of the concentration of P in soil and vegetation at the soil
surface and the amount of runoff that occurs, so management should focus on reducing the
concentration of P at the soil surface during runoff periods.
ï‚· While very high P concentrations at the soil surface are most frequently caused by excessive
applications of manure P, fertilizer P can also be a contributor, especially if the fertilizer is
broadcast.
ï‚· Soil fertility may be impaired through nutrient depletion if P removed in the harvested crop is
not replaced.
ï‚· Accumulation of cadmium (Cd) in the soil from long-term application of Cd-containing P
fertilizer may be a concern for human and soil health.
ï‚· Banding P fertilizer under the soil surface, near the seed-row during seeding at rates based on
an effective soil test and an accurate prediction of crop requirements will reduce the risk of
excess P in runoff, P depletion and excess Cd accumulation in soils and cLast edited by chuckChuck; Mar 21, 2023, 11:43.
Comment
- Reply to this Thread
- Return to Topic List
Comment